Follow Us On
Follow By Email
Blogtrottr

Monday, June 24, 2013

Sound Deadening, Part 4

On Saturday afternoon, my friend Cary and I did some more work on the sound deadening for KITT. We secured the hatch glass as I had done before and started on the passenger side rear wheel well.


Knight 2000 Intarsia Wooden Artwork

My friend Cary stopped over on Saturday morning with a surprise for me. He does a type of woodworking called Intarsia and made the Knight 2000 logo into a beautiful piece of art.


Sunday, June 23, 2013

Paint Finishes: Taking Another Look

The weather was beautiful on Saturday and I took the opportunity to take the trunk lid and spoiler out into the sunlight to compare the finishes. Just as a refresher, the spoiler was color sanded and buffed while the trunk lid was not.

My thoughts while it was under fluorescent lighting was that the spoiler had a little more dull finish, but it was completely smooth. Whereas the trunk lid was high gloss, but it showed more imperfections, i.e. specks/dust. Out in the sunlight I still feel the same way. I like the high gloss look of the trunk lid, but also the flawless look of the spoiler.

Make sure to click on the photos to see them in full resolution.


Monday, June 17, 2013

Sound Deadening, Part 3

I worked a little more on sound deadening KITT this evening. I decided to tackle the driver side rear wheel well. I used some paper as templates and folded them to the size and shape I needed. Then I used them as patterns to cut out the RAAMmat BXT II.


Sunday, June 16, 2013

Sound Deadening, Part 2

This afternoon we worked on the sound deadening again. We needed the hatch to be up and out of the way so we could access the back of the car. I started by raising the garage door and unplugging it.


Saturday, June 15, 2013

Sound Deadening, Part 1

This afternoon we started on the sound deadening. KITT was full of spare parts and was quite dusty, so I had to empty him out and vacuum the inside.


Friday, June 14, 2013

The Ultimate Knight Rider Map

Have a Knight Rider replica or wonder if others in your area might?  Would you like to see where the closest Knight Rider Convention or Club is?  How about being able to pinpoint shooting locations from the show?  This map has it all!  Make to sure to check out the Ultimate Knight Rider Map!


Finishing The Calipers

Yesterday afternoon I did a quick touch up coat on the interiors of the calipers. I was mainly concerned with the "mistake" caliper as some of the lacquer thinner had worked its way onto the interior surfaces. 


Thursday, June 13, 2013

Knight Rider Historians

Knight Rider Historians - Finding and documenting original props from the television series Knight Rider.


Knight Rider Archives

The Knight Rider Archives has been relaunched!  This site is awesome!  Check it out if you have not already.


Wednesday, June 12, 2013

Painting The Calipers

My friend Cary was in town today and asked if I wanted to meet him for lunch on my lunch break. I mentioned that I was going to paint the calipers after work and he decided to stick around town so he could help me when I got off work.

When I got home today, I used the air compressor to blow the dust off all of the calipers. At this point they all have just one coat of the POR-15 black. You can see my "mistake" from Monday in the lower right corner. :(


Monday, June 10, 2013

Don't Make The Same Mistake Twice

It is said that we learn from our mistakes, or rather that we should learn from them. The latter applies to me today as I did not learn from my first attempt with the POR-15 Caliper Paint on the rear differential cover. Painting that red was a nightmare. It took four coats before it even began to look solid red and another three before I wasatisfied enough to give up. I decided that the result was not worth the effort.

So today in my infinite wisdom, I decided I was going to paint the calipers red. Brilliant, I know!

Here are the calipers with one coat of POR-15 black. Don't they look awesome? Wouldn't they even look better with another coat of POR-15 black? Did this occur to me this afternoon? Nope, not once.


Friday, June 7, 2013

KITT, As He Sits

Today after work I stopped down to see Troy and find out how KITT's rear end was coming and when he planned to come over to do the welding on KITT. Right now, we are planning on an evening this next week.

I decided to shoot a quick video showing KITT's current status. The video gives an up close look at the finished firewall pad we made. We will be finishing the rest of the sound deadening this month.